To Next PageTo Next PageWhy is my Panasonic Air Conditioner dripping water?
If you observe dewdrops forming on your Panasonic Air Conditioner, it's because indoor moisture is being cooled by the cool wind, leading to dewdrop accumulation. To address this, ensure that you maintain proper humidity levels in the indoor environment.
Why is my Panasonic Air Conditioner not turning on?
If your Panasonic Air Conditioner is not operating, it may be because the compressor protection circuit is activated for the first approx. 3 minutes. Wait for approximately 3 minutes before expecting the unit to start operating.
Why does the fan keep running on my Panasonic S-106MF2E5 after I turn it off?
If the fan of your Panasonic Air Conditioner continues to rotate for a while even after you stop the operation, it is a normal operation that helps ensure smooth functioning. The fan may also sometimes rotate to dry the heat exchanger due to specific settings.
Why is my Panasonic S-106MF2E5 making a noise?
If your Panasonic Air Conditioner is emitting unusual noise, it could be due to the sound of refrigerant liquid flowing inside the unit. Check to ensure proper operation and that there are no blockages. It may also be the sound of drainage water flowing through the drain pipe. Inspect the drainage system for any obstructions. Alternatively, a cracking sound might occur because of temperature changes of parts. Allow the unit to adjust and see if the sound continues.
Why does my Panasonic Air Conditioner smell?
If your Panasonic Air Conditioner emits an odor, it may be due to indoor odor components, such as cigarette or cosmetic odors, that have accumulated in the unit and are being discharged. In such cases, it is recommended to consult your dealer. Similarly, if the unit inside is dusty, you should also consult your dealer.
What to do if my Panasonic S-106MF2E5 is blowing dust?
If you notice dust coming from your Panasonic Air Conditioner, it's likely due to dust accumulation inside the indoor unit being discharged. Regularly clean the indoor unit to resolve this issue.
Why does the wind direction change on my Panasonic Air Conditioner?
If wind-direction changes while operating your Panasonic Air Conditioner, or if the wind-direction setting cannot be made, it could be that when the air discharge temperature is low or during defrost operation, horizontal wind flow is automatically activated; this is normal. It is also possible that the flap position is occasionally set up individually, so adjust the flap position as needed.
Why is my Panasonic S-106MF2E5 Air Conditioner emitting fog?
If you see fog coming from your Panasonic Air Conditioner, it may be because the unit inside (heat exchanger) is dirty and requires cleaning; consult your dealer, as technical engineering is required. Fog can also appear during defrost operation, which is a normal process and requires no action.
Why does the flap move several times when I change the wind direction on my Panasonic S-106MF2E5 Air Conditioner?
If, when you change the wind-direction on your Panasonic Air Conditioner, the flap operates several times and stops at a designated position, it is normal. When the wind-direction is changed, the flap operates after searching for a standard position.
Why does my Panasonic Air Conditioner fan run faster at the beginning?
If, at the start, your Panasonic Air Conditioner's fan rotates faster than the set speed (for 3 to 30 minutes), this is a normal operation. It's part of an operation check to confirm whether the fan motor rotation is within the usable range.
General| Brand | Panasonic |
|---|---|
| Model | S-106MF2E5 |
| Category | Air Conditioner |
| Language | English |
Lists indoor and outdoor temperature ranges for cooling and heating modes.
Explains symbols and procedures for recycling electrical products and batteries.
Identifies key components of U1 Type and F2 Type indoor units.
Explains how to change airflow direction using the FLAP button.
Explains how the "DRY" mode works and its limitations.
Details heating performance, defrosting, and standby modes.
Instructions for cleaning the indoor unit's air intake and outlet.
Lists symptoms and causes for common indoor unit problems.
Lists symptoms and causes for common outdoor unit problems.
Details models, power, capacity, sound, dimensions, and weight.
Lists technical specifications for F2 type units.
Details specifications for single-phase Mini (LE1) units.
Details specifications for 3-phase Mini (LE1) units.
Lists technical specifications for 2WAY (ME1) units.
Details standard COP mode specifications for 2WAY (ME1) units.
Details high COP mode specifications for 2WAY (ME1) units.
Lists technical specifications for 3WAY (MF1) units.
