29
How to unmount indoor unit
Press the 2 PUSH marks on the lower part of the indoor unit and unlatch the tabs. Then lift
the indoor unit and unmount.
1 Push by both hands.
Connecting part
Tabs
Installation plate
2 Remove
3-6. Wiring Instructions
<Power supply, Inter-unit control wiring, Remote control wiring>
(1) Open the front panel and remove the screw (×1).
Type 45, 56, 73, 106Type 15, 22, 28, 36
Front panel
Screw (4×12)
Front panel
Screw (4×12)
(2) Open the cover plate until it is in locked position.
Type 15, 22, 28, 36
Cover plate
Type 45, 56, 73, 106
Cover plate
01_330200_EU_Eng.indb 29 2021/1/13 10:23:01
To Next Page
Loading...
