Panasonic S-22MU2E5BN - Page 57

57
<Procedure of CZ-RTC6 series>
Stop the system before performing these steps.
1
Keep pressing the
, and buttons
simultaneously for 4 or more seconds.
The “Maintenance func” screen appears on the LCD
display.
Maintenance func
XX / XX
[ ][ ]
ECONAVI
nanoeX
RC. setting mode
2
Press the
or button to see each menu.
Select “Detailed settings” on the LCD display and press the
button.
The “Detailed settings” screen appears on the LCD display.
3
Select the “Unit no.” by pressing the
or button.
After selecting “Unit no.”, press the button and proceed to
Step
4
.
If the button is pressed, proceed to Step
6
.
4
Select the “Code no.” by pressing the
or button.
Change the value by pressing the or button to [0000XX].
After selecting “Code no.” , press the
button and proceed to
Step
5
.
XX=90
XX=91
XX=92
XX=93
Electrical component box
Maintenance func
XX / XX
[ ][ ]
Simple settings
Detailed settings
Auto address
Detailed settings
[ ][ ]
Unit no.
Code no.
1-1
000010
Set data 00010001
Detailed settings
[ ][ ]
Unit no.
Code no.
1-1
0000XX
Set data 00010001
]
Black
01_350115_EU_Eng.indb 57 2023/3/1 13:53:04