1-1291-128
Ceiling Panel
6-10. Before Installing the Ceiling Panel
(1) Remove the air-intake grille and air filter from the
ceiling panel. (Figs. 1-58 and 1-59)
(a) Remove the 2 screws on the latch of the air-
intake grille. (Fig. 1-58)
(b) Press on the 2 latches of the air-intake grille
with your thumbs in the direction of the arrow
to open the grille. (Fig. 1-58)
(c) With the air-intake grille open about 45°,
remove the safety cord (hook on the grille
side). (Fig. 1-59)
(d) Pull the air-intake grille towards you to remove
it from the ceiling panel.
(2) Pull down the two panel catches on the body of
the indoor unit body. (Fig. 1-60)
CAUTION
Never touch or attempt to
move the air direction louver
by hand or you may dam-
age the unit. Instead, use the
remote controller if you want
to change the direction or air
flow.
Ceiling panel
Air-intake grille
Latch
Screw
Safety cord
Air filter
45°
Fig. 1-58
Fig. 1-59
Fig. 1-60
Ceiling panel
Screws M5 with washer
Panel catch
(arrange facing downwards)
(2 locations)
(supplied)
Ceiling panel wiring
connector
Air filter
Air-intake grille
Panel catch
Unit body
Electrical
component box
Electrical
component box
Clamp
1
SM830203-04.indb 128 15/10/16 10:44:59
To Next Page
Loading...
