5-195-18
5. Outdoor unit maintenance remote control
5-10.
Monitoring Operations: Display of
Indoor Unit and Outdoor Unit Sensor
Temperatures
<Operating procedure>
À
Press and hold the (Check) button and
buttons simultaneously for 4 seconds or longer to
engage temperature monitor mode.
During temperature monitoring,
is illuminates.
(The display and operations are the same as
for monitor mode using the indoor unit remote
controller.)
Á
Press the button and select the indoor unit to
monitor.
Â
Press the temperature setting and buttons
and select the item code of the temperature to
monitor.
The unit No. of the selected indoor unit, and the
temperature data, are displayed.
Ã
To end monitoring, press the (Check) button.
The display returns to the normal display.
NOTE
The display does not blink.
Â
Á
À
Ã
A
5
SM830203-04.indb 18 15/10/08 13:33:42
To Next Page
Loading...
