5-155-14
5. Outdoor unit maintenance remote control
Display (functions)
• Use the temperature setting
and buttons to change the item code.
skrameRÁ ItemÀ Item code
00
sutatslaitinitAlamronnehwFFO:)edoc(stnetnocmralatinuroodtuO
Blinking 8-alarm code display at pre-trip, LED
01 No. of indoor units connected in that refrigerant system
02 Unit. Nos. of connected indoor units in that refrigerant system *2
03 Operating status of indoor units in that refrigerant system (blinks when alarms occur) *2
04 Unit Nos. of indoor units in that refrigerant system where the thermostats are ON *2
05 No. of outdoor units connected in that refrigerant system
No. of connected
units: 1
06 Unit Nos. of connected outdoor units in that refrigerant system *2
07 Operating status of outdoor units in that refrigerant system (blinks when alarms occur) *2
08
09
0A
0b
0C
0d
0E
0F
10 Total compressor operating time (in 1-hr. units) *3
11
12
13
14
15
16 Total power ON time of outdoor unit (in 1-hr. units)
17 Compressor start count
18
19
FE Outdoor unit microcomputer firmware version
FF Outdoor unit microcomputer software version
À and Á correspond to Fig. 6 on the next page.
5
SM830203-04.indb 15 15/10/08 13:33:41
To Next Page
Loading...
