Panasonic S-36PF1U6 - Page 296

6-12
6. Test run
<Procedure of CZ-RTC3 / CZ-RTC5>
<Procedure of CZ-RTC4>
1
Keep pressing the
, and
for 4 or more seconds.
buttons simultaneously
The “Maintenance func” screen appears on the LCD display.
2
Press the
or button to see each menu.
Select “3. RC. setting mode” on the LCD display and press
button.
3
The “RC. setting mode” screen appears on the LCD display.
Change the “Code no.” by pressing the
or button.
4
Select the “Set data” by pressing the
or button.
Select one of the “Set data” by pressing the
or button.
Then press the
button.
RC. setting mode
Code no. Set data
Sel. Next
20:30 (THU)
0001
01
Press the remote controller
button and
button at the same time.
(Press and hold for 4 seconds or longer.)
Select the “CODE No." by pressing the temperature setting
button.
Select the “SET DATA" by pressing the button.
Then press the button.
Finally, press the button.
/
4
3
2
1
the
Main/sub
MainSub
Code
no.
Set Data
ITEM
0000
02
32
01
0001
Clock type
12 hours (AM/PM) 24 hours
Temp sensor setting
Main unitRC
Main/sub
MainSub
CODE
No.
SET DATA
ITEM
Clock type
12 hours (AM/PM) 24 hours
RC. CK NormalRC. CK
Room temperature sensor Main unitRC
A
Maintenance func
2. Service contact
4. Test run
Sel. Page [] Confirm
20:30 (THU)
3. RC. setting mode
1. Outdoor unit error data
6
SM830203-04.indb 12 15/10/14 16:25:10