Panasonic S-36PY1E5

1
1-405
Reinstall the removed part to be placed in its original position.
(See the section “4-2. Preparation Before Installation”.)
Then install the accessory supplied side covers (L/R) on both
sides of the indoor unit.
Attach the supplied side plates.
Slide the covers from the front side and attach to the claws
of the latches.
Tighten the screws (supplied).
Side plate
Screw
Attach
Attach the accessory supplied side covers.
Insert the side plates in the direction of the arrow and fix them
with 2 screws once you’ve removed.
Screw (accessory supplied)
Side cover (accessory supplied)
Fig. 4-25
Attach the air-intake grille.
When attaching the air-intake grille, perform the reverse
procedure to removing the grille.
Refer to the section “4-2. Preparation Before Installation”.
Be sure to attach the safety string.
Close the air-intake grille and fix the claws of the latches with
the screws.
Safety string

Fig. 4-26
(Ceiling)
Part Name Figure Q’ty Remarks
Special
washer
For temporarily suspending
indoor unit from ceiling
Drain
insulator
For drain hose joint
Flare
insulator
For gas tube joint
For liquid tube joints
For positioning
installation
Clamper
For flare insulator
and wiring
Full-scale
installation
diagram
Drain hose
For main unit + PVC
pipe joints
Hose band
Side
cover (R)
Side
cover (L)
For drain hose
connection
Screw
Operating
Instructions
Installation
Instructions
4
2
1
1
6
1
1
1
1
1
1
1
2
For side cover (L/R)
(Packed in carton box)
For right side
(Packed in carton box)
For left side
4-7. Final Procedure
SM830211-07PAC-i.indb405SM830211-07PAC-i.indb405 2013/09/1722:48:302013/09/1722:48:30