http://servis-manual.com/
8.2 How to enter the Self-Diagnostic Function
TOP PREVIOUS NEXT
1.Turn the unit on with no cassette in the deck. (Select the tape function)
2.Press and hold the “STOP/TUNE MODE” button for at least 2 seconds.
3.While pressing the “STOP/TUNE MODE” button, press “FF/MEMORY” button for at least 2
seconds.
4.“T” will appear on the FL display. (unit is in the Self-Dianostic Function)
TOP PREVIOUS NEXT
Stránka č. 1 z 1
file://C:\Documents%20and%20Settings\Admin\Plocha\SCHÉMATA\VIDEA\PAN...
To Next Page
Loading...
