To Next PageTo Next PageWhy my Panasonic SA-AKX32PH set cannot ON?
If your Panasonic Stereo System won't turn on, it might be due to a faulty AC cord or a loose connection. It can also be due to P5701 solder crack, dry joint or open fuse F1, PC5702/PC5799 solder crack, dry joint, short circuit, open circuit, or faulty IC5701 or IC5799. If the AC cord is faulty, please refer to section 7.2.1 Fig.1 SMPS P.C.B..
What to do if my Panasonic SA-AKX32PH can ON then F61?
If your Panasonic Stereo System turns on but then displays F61, the cause may be a faulty speaker unit, loose connection, or a short. You can check PWM output at pin 10, 14 of D-Amp IC; check + VDD/SS supply at pin 4 & 20 of D-Amp IC; check pin 1 (OSC) & pin 23 (MODE) of D-Amp IC; check pattern crack and solderability; or the D-Amp IC5000, IC5200, IC5400 may be defective. If the speaker unit is faulty, please refer to section 7.2.3 Fig 3 D-Amp P.C.B..
What to do if my Panasonic SA-AKX32PH Stereo System can ON then F76?
If your Panasonic Stereo System turns on and then displays F76, it could be due to a short circuit between Pin 14 and Pin 15, Pin 15 and Pin 16, or Pin 16 and Pin 17. Also, check the cable wire connection between connector ZJ2007(At Main P.C.B) & connector CN5802(At SMPS P.C.B). The Voltage Regulator IC (IC2010) & Switching Regulator IC (IC2011) may be faulty, or there may be a PC5720 solder crack, dry joint, short circuit, or open circuit. If the short circuit is between Pin 14 and Pin 15 or PC5720 solder crack, refer to section 7.2.1 Fig.1 SMPS P.C.B..
Why does my Panasonic SA-AKX32PH work normally for some time then F76?
If your Panasonic Stereo System works for a while and then displays F76, it might be due to improper contact between D5801 or D5802 to the heatsink, or the set may be triggering temperature protection.
General| Speaker Configuration | 2.0 Channel |
|---|---|
| Bluetooth | Yes |
| USB Playback | Yes |
| FM Radio | Yes |
| Playable Media | CD, USB |
| Supported File Types | MP3, WMA |
| USB Port | Yes |
| Preset Equalizer | Yes |
| Input Sensitivity | 500 mV |
| Frequency Response | 20 Hz - 20 kHz |
| Type | Mini System |
