Panasonic SA-HT800VP - Page 26

Section Code Meaning Note
Disc code F103 Illegal Highlight Position Possibility of illegal disc when
highlight
is displayed
Decoder
related
F220 Y level adjustment failure Brightness signal level
adjustment
cannot be properly operated
F221 C level adjustment failure Color signal level adjustment
cannot
properly operated
II C error F4FF Compulsory initialization failure (time out)
DSC related F500 DSC error DSC stops due to servo failure.
(
focus failure, etc.)
F501 DSC not ready Communication failure
between
system computer(No
communication
because DSC does not move)
F502 DSC time out failure See F500.
F503 DSC communication failure Communication failure (Result
failure
occurs after communication
command
transmitted.)
F504 Data slice offset adjustment failure Not in use. (FEP error)
F505 DSC Attention Error See F500.
F506 Invalid media Disc is placed upside down;
TOC
unreadable or invalid disc is
inserted.
ODC related F600 Control information unattainable due to
demodulation error
Operation stops because
navigation
data cannot be obtained due to
demodulation system failure.
F601 Unknown sector ID requested Operation stops because
access
illegal ID data is requested.
F602 LEAD-IN unattainable due to demodulation
error
Unable to read LEAD IN data
F603 KEYDET unattainable due to
demodulation error
Unable to obtain CSS data
F610 ODC failure No permission of command
issue
F611 6626 QCODE don't read ERROR Unable to obtain seek address
at
system
F612 No CRC OK during a certain time of
duration
Unable to obtain ID data at DVD
system
F630 No response to KEY DET makeshift (Internal use)
F631 CPPM KEY DET unavailable to FILE end
terminal
CPPM fail system cannot be
read
scratch.
F632 CPPM KEY DET unavailable Revoke or altered.
26