5. Rotate the capstan rotor clockwise in order to remove tape slack.
Rotate the main cam gear counterclockwise again and remove the
cassette tape.
6. Reassemble the loading motor and the mechanical unit to the Main
P.C.B. and securely fasten with the screws. / (Refer to "Precaution
to Be Taken During Installation of Traverse Deck Unit".)
16.10. Removing the DVD Disc Manually
When electrical system failure occurs and a loaded DVD Disc is stuck in the traverse deck unit,
follow the instruction below to remove it.
1. Disconnect the power cord and remove the top cabinet.
2. Remove front panel and traverse deck unit. / (Refer to items 16.2
and 16.5)
74
To Next Page
Loading...
