Step 5: Pull out the entire Power Amp unit.
7.2.5. Disassembly of the Rear Panel and
Fan Unit
Follow Step (1) to Step (4) described in section 7.2.4.
Steps 1 and 2: Remove 7 screws from the rear panel.
Step 3: Disconnect the connector CN507 to detach the rear
panel.
Step 4: Remove 4 screws from the rear panel.
Step 5: Lay the rear panel flat and remove the fan unit as arrow
shown.
7.2.6. Disassembly and checking of the
AC Inlet P.C.B.
Follow Step (1) to Step (4) described in section 7.2.4.
Follow Step (1) to Step (3) described in section 7.2.5.
Step 1: Check the AC Inlet P.C.B.
7.2.7. Disassembly and checking of the
Power P.C.B. and Transformer
P.C.B.
Follow Step (1) to Step (4) described in section 7.2.4.
Follow Step (1) to Step (3) described in section 7.2.5.
12
SB-WA15E / SB-WA15EB
To Next Page
Loading...
