EasyManua.ls Logo

Panasonic SB-WA15E User Manual

Panasonic SB-WA15E
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
n Active subwoofer
Type 1 Way 2 Speaker, Bass-ref.
Speaker unit (Woofer) 13 cm cone type, 4
Output sound pressure level 80 dB/W (1.0 m)
Frequency range 40 Hz-220 Hz (-16 dB)
45 Hz-180 Hz (-10 dB)
Dimensions (W x H x D) 200 x 367.5 x 492 mm
Mass 11.3 kg
n General
Power supply AC 230-240 V, 50 Hz (EB)
AC 230 V, 50 Hz (E)
Power consumption 340 W
Power consumption (Standby
mode)
1W
n System: SC-HT15EG-S
Music Center: SA-HT15EG-S
Satellite speakers: SB-HT15P-S
Active subwoofer: SB-WA15E-S
1 Safety Precautions
3
© 2005 Matsushita Electric Industrial Co. Ltd.. All
rights reserved. Unauthorized copying and
distribution is a violation of law.
SB-WA15E
SB-WA15EB
Colour
(S)...Silver Type
n System: SC-HT15EP-S
Music Center: SA-HT15EP-S
Satellite speakers: SB-HT15P-S
Active subwoofer: SB-WA15E-S
n System: SC-HT15EB-S
Music Center: SA-HT15EB-S
Satellite speakers: SB-HT15P-S
Active subwoofer: SB-WA15EB-S
Note :
Specifications are subject to change without notice.
Mass and dimensions are approximate.
Active Subwoofer System
Specification
CONTENTS
Page Page
ORDER NO. MD0503091C2
Question and Answer IconNeed help?

Do you have a question about the Panasonic SB-WA15E and is the answer not in the manual?

Panasonic SB-WA15E Specifications

General IconGeneral
BrandPanasonic
ModelSB-WA15E
CategorySubwoofer
LanguageEnglish

Summary

Safety Precautions and Guidelines

Leakage Current Testing Procedures

Procedures for performing cold and hot leakage current tests for safety.

AC Mains Lead Safety and Repair Preparation

AC Mains Lead Cautions and Fuse Replacement

Safety cautions for the AC mains lead and instructions for fuse replacement.

Disassembly Procedures

Power Amp Unit Disassembly Steps

Step-by-step instructions for dismantling the power amplifier module.

Rear Panel and Fan Unit Disassembly

Instructions for removing the rear panel and cooling fan assembly.

AC Inlet PCB Disassembly

Procedure to remove and check the AC inlet printed circuit board.

Power & Transformer PCB Disassembly

Steps for dismantling and inspecting the power and transformer PCBs.

Power IC and Transistor Replacement

Guide on how to replace power integrated circuits and transistors.

Voltage and Waveform Analysis

Voltage Measurement Points

Standard voltage values for AC inlet and power PCBs for diagnostic checks.

System Diagrams and Schematics

Printed Circuit Board Layouts

Parts Information

Parts List Notes and Conventions

Notes on safety, component markings, and unit conventions for parts lists.

Related product manuals