7.2.1. Disassembly of the Front Panel
Unit
Step 1: Slot a steel ruler into the holes to give a gap between
the Front Panel unit and the speaker cabinet assembly unit.
Steps 2: Slot a piece of wood chip in between the Front Panel
unit and the steel ruler as arrow shown.
Step 3: Use the screwdriver slightly lift up the Front Panel unit
as arrow shown.
Note:
Be careful with the bosses which are glued to the unit.
Step 4: Remove the Front Panel unit from the speaker cabinet
assembly unit as arrow shown.
7.2. Disassembly of the Speaker Unit and Checking of the P.C.B.
9
SB-WA15E / SB-WA15EB
To Next Page
Loading...
