Do you have a question about the Panasonic SC-AK20 and is the answer not in the manual?
rated minimum sine wave RMS power output at 1 kHz with 1% total harmonic distortion | 30W per channel |
---|---|
rated minimum sine wave RMS power output at 100 Hz - 20 kHz with 1% total harmonic distortion | 26W per channel |
input sensitivity AUX | 250 mV |
input impedance AUX | 22 kΩ |
sampling frequency | 44.1 kHz |
---|---|
decoding | 16 bit linear |
beam source/wavelength | Semiconductor laser/780 nm |
frequency range (200 kHz steps) | 87.9-107.9 MHz |
---|---|
frequency range (100 kHz steps) | 87.5-108.0 MHz |
sensitivity | 23.3 dBf (4.0 µV, IHF) |
type | 2 way 2 speaker system |
---|---|
woofer | 12 cm cone type |
tweeter | 6 cm cone type |
frequency range | 520-1710 kHz |
---|---|
sensitivity | 20 dB 500 µV/m |
output sound pressure level | 85 dB/W(1.0 m) |
tape speed | 4.8 cm/s |
---|---|
frequency response NORMAL | 35 Hz - 14 kHz |
frequency response HIGH POSITION | 35 Hz - 14 kHz |
power consumption | 95 W |
---|---|
power supply | AC 120 V, 60 Hz |
weight | 7.0 kg |