- 21 -
5 From “Select Speaker”, select this
unit as the output speakers.
≥ If you have multiple AllPlay speakers, you
can enjoy synchronized sound from them.
Select “ ” and then select the
speakers to group.
– You can also play different songs on other AllPlay speakers at the same time.
– The number of AllPlay speakers that can perform playback at the same
time differs depending on the situation of use.
– When you turn off one of the AllPlay speakers, other AllPlay speakers in
the same group may stop the playback.
≥ This unit will be displayed as “Panasonic ALL8” ( ) / “Panasonic ALL3”
( ) if the device name is not set.
≥ When playing back music from the DLNA server (PC with Windows 7 or later
installed, smartphone, Network Attached Storage (NAS) device, etc.), add the
contents and folder to the libraries of the Windows Media
®
Player, the
smartphone, or the NAS device, etc.
– Playlist of Windows Media
®
Player can play back only the contents that are
stored in the libraries.
≥ When this unit is selected as DLNA speakers ( ):
– The volume control on the unit may not apply to the app.
– Playback control using a progress bar on playback screen may not work.
– The volume level applied to AllPlay speakers will not be reflected.
– If the unit is selected as output speakers by another device, the music source
is changed to the new device. However the former device’s display may not
change.
≥ About supported format, refer to “Audio support format” (l 36, 40).
– File formats that are not supported by your DLNA server cannot be played.
≥ Depending on the contents and the connected equipment, playback may not
be performed properly.
≥ For details on the app “Panasonic Music Streaming”, visit
http://panasonic.jp/support/global/cs/audio/app/
≥ More apps are available. For details, visit
www.panasonic.com/global/consumer/homeav/allseries/service
(These sites are in English only.)
To Next Page
Loading...
