- 6 -
Indicator illumination
The indicator patterns illustrated below are displayed during normal
operational conditions.
Indicator Description
Operation indicator (amber) Blinks once
≥ The unit detects the switch touched.
Blinks twice
≥ The unit detects a valid operation
performed by touching and holding
the switch.
Blinks
≥ Automatic standby mode is
activated. (l 10)
Mode indicator (amber) Blinks once
≥ The following setting is turned on.
“Network standby” (l 16)
“Operation sound setting” (l 25)
– When the setting is turned off, it blinks
twice.
Blinks
≥ It may blink when the unit turns to
standby mode.
– Do not disconnect the AC power
supply cord (AC mains lead). Doing
so may cause malfunction or
damage.
≥ The mode indicator also blinks when
the volume is changed.
To Next Page
Loading...
