Getting started
11
VQT3X51
STEP 2: Preparing the speakers
1 Attach the stand to the base.
2 Tighten the 3 screws (supplied) securely.
3 Attach the speaker. 4 Tighten the screw (supplied) securely.
≥ To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
Attach the speaker cable sticker (supplied) and connect the speaker cables to the speakers.
e.g., Surround speaker
Assembling the front speakers [BTT196] [BTT195]
Thread the
speaker cable
through the
base.
Slide the
speaker
cable into
the groove.
Leave the
space of about
80
mm (3
5
/32q).
Connecting the speaker cables
Push
r: White
s: Blue line
Speaker cable sticker (supplied)
Connector
Speaker indication
Speaker cable sticker Connector
FRONT Lch 1 WHITE
FRONT Rch 2 RED
SURROUND Lch 3 BLUE
SURROUND Rch 4 GRAY
CENTER 5 GREEN
SUBWOOFER 6 PURPLE
SC-BTT190P_eng.book 11 ページ ２０１２年２月２０日 月曜日 午後５時５分
To Next Page
Loading...
