Panasonic SC-GA10 User Manual

TQBJ2056
15
Touch and hold [ ] for at least 2
seconds to disconnect it.
You can change the link mode to prioritize
connectivity quality or sound quality.
Preparation
≥ Make sure the unit is on.
≥ Touch [ ].
≥ If a Bluetooth
®
device is already connected,
disconnect it.
Change the setting by “Panasonic
Music Control” app. (l 12)
Mode 1: Emphasis on connectivity
Mode 2: Emphasis on sound quality

≥ Select Mode 1 if the sound is interrupted.
≥ When enjoying video contents with this function, the
video and audio output may not be synchronized. In this
case, select Mode 1.
≥ The factory default is Mode 2.
AUX input
You can listen to music from an external music
device through this unit.
Preparation
≥ Connect an external music device. (l 9)
≥ For details, refer to the Owner’s Manual of the
device.
1Touch [AUX].
≥ The AUX selector indicator lights up.
2 Start playback on the connected
device.
1 While in AUX mode, touch and hold
[AUX] and [ ] for at least
4 seconds.
≥ The selector indicator shows the current
input level.
Network selector indicator blinks
Normal level
“Panasonic Music Control” mode
selector indicator ( ) blinks
High level
2Touch [j VOLUME](normal level) or
[VOLUME i](high level) to change
the input level.

≥ The factory default is high level.
≥ Turn the volume of the external device down to reduce
the input signal. High level of input signal will distort the
sound.
≥ When enjoying video contents with this function, the
video and audio output may not be synchronized.
≥ Your Google Assistant works for some basic playback
operations such as volume adjustment or muting. (l 11)
Disconnecting a Bluetooth
®
device
Bluetooth
®
link mode
To select the sound input level of
the external device
SC-GA10-TQBJ2056.book 15 ページ ２０１８年１月２２日 月曜日 午後３時５５分

Panasonic SC-GA10 Specifications

General

Woofer	Yes
Speaker type	2-way
Woofer diameter	80 mm
Number of drivers	3
Number of speakers	1
Audio output channels	2.1 channels
Impedance	8 Ω
RMS rated power	40 W
Total Harmonic Distortion (THD)	10 %
Frequency range	2.4 - 5 GHz
Bluetooth version	4.2
Connectivity technology	Wired & Wireless
Recommended usage	Universal
Virtual assistant	Google Assistant
Audio formats supported	AAC, SBC
Mobile operating systems supported	Android, iOS
Amplifier class	D
Power source type	AC
AC adapter frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (standby)	0.5 W
Power consumption (typical)	11 W
Product type	2.1 portable speaker system
Product color	Black
Product design	Rectangle
Volume control	Touch

Weight and Dimensions

Width	100 mm
Height	284 mm
Weight	1700 g