EasyManuals Logo

Panasonic SC-GA10 User Manual

Panasonic SC-GA10
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
16
TQBJ2056
Others
You can dim the brightness of indicators.
Touch and hold [NET] and [ ] for
more than 4 seconds.
All indicators will turn dim.
To turn off dimmer mode, repeat the operation above.
The setting is maintained until it is changed again.
The factory default is off.
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve
the way a feature operates. These updates are
available free of charge.
When a new update is available, this unit will
update the firmware automatically after midnight
if the unit is not in use. (This works only when
the unit is on.)
Connect this unit to the network. (l 10)
Make sure that the network is connected to the
Internet.
Make sure the unit is on.
Preparation
Connect this unit and your smartphone/tablet
to the network. (l 10)
Make sure that the network is connected to the
Internet.
Make sure that the free app “Panasonic Music Control”
is already installed with your smartphone/tablet.
Make sure the unit is on.
1 Start the app “Panasonic Music
Control”.
Always use the latest version of the app.
2 Select this unit in the speaker
settings.
If update is available, notification will
appear on this unit’s name.
3 Follow the on-screen instructions.
If an update is detected during the network setup,
updating will be performed as a part of the network
setup. (l 10)
When you connect the AC power supply cord to the AC
outlet (l 9), or when you turn on the unit, updating will
be performed if new update is available.
If a critical update is detected while the unit is in use,
updating will be prioritized.
Updating will require several minutes. It may take longer
or may not work properly depending on the connection
environment.
Dimmer mode
Firmware updates
DO NOT DISCONNECT the AC
adaptor and the AC power supply
cord during the update.
During the update process (l 8), no
operations can be performed, and you
cannot use your Google Assistant.
Automatic updates
Manual updates
SC-GA10-TQBJ2056.book 16 ペー 2018年1月22日 月曜日 午後3時55分

Other manuals for Panasonic SC-GA10

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic SC-GA10 and is the answer not in the manual?

Panasonic SC-GA10 Specifications

General IconGeneral
WooferYes
Speaker type2-way
Woofer diameter80 mm
Number of drivers3
Number of speakers1
Audio output channels2.1 channels
Impedance8 Ω
RMS rated power40 W
Total Harmonic Distortion (THD)10 %
Frequency range2.4 - 5 GHz
Bluetooth version4.2
Connectivity technologyWired & Wireless
Recommended usageUniversal
Virtual assistantGoogle Assistant
Audio formats supportedAAC, SBC
Mobile operating systems supportedAndroid, iOS
Amplifier classD
Power source typeAC
AC adapter frequency50/60 Hz
AC adapter input voltage100 - 240 V
Power consumption (standby)0.5 W
Power consumption (typical)11 W
Product type2.1 portable speaker system
Product colorBlack
Product designRectangle
Volume controlTouch
Weight and Dimensions IconWeight and Dimensions
Width100 mm
Height284 mm
Weight1700 g

Related product manuals