8
TQBJ2056
∫ Mic mute
∫ Firmware update (l 16)
Do not disconnect the AC adaptor and the AC power supply cord during the update.
≥
During the update process, no operations can be performed, and you cannot use your Google Assistant.
∫ NET (Network) selector indicator
Indicator Description
Illumination: orange The 3rd to 6th status indicators light up
≥ The microphones are muted.
The unit will not hear any command and your
Google Assistant features will not work.
– To use your Google Assistant features:
Touch [ ] again.
Indicator Description
Illumination: white The selector indicator scrolls from left to
right
≥ The unit is starting the firmware update
process.
The status indicator scrolls from the 1st
position (left) to the 4th position repeatedly
≥ The unit is updating the firmware.
The status indicator scrolls from the 5th
position to the last position (right)
repeatedly
≥ The unit is updating the firmware.
The selector indicator scrolls from left to
right
≥ The unit is finishing the firmware update
process. When the scrolling stops, firmware
update is completed.
Indicator Description
Illumination: white The Network selector indicator blinks slowly
≥ The unit is ready for the network setup.
≥ The unit is disconnected from network.
≥ The network setup has failed.
The Network selector indicator lights up
≥ The unit is in Network selector mode with
network connected.
SC-GA10-TQBJ2056.book 8 ページ ２０１８年１月２２日 月曜日 午後３時５５分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
