19
TQBJ2179
8 Attach the unit.
≥ Connect the antenna and the AC power supply cord to
the unit before hanging the unit onto the wall. (l 5)
1 Hook the unit securely onto the wall mount
brackets with both hands.
2 Slightly lift up the unit vertically until the slot
reaches the hook of the safety holder.
3 Push down until the unit is hooked and locked onto
the safety holder with a click sound.
≥ After hanging the unit, slightly pull the unit carefully to
confirm that the unit sits securely on the wall mount
brackets and the safety holder.
9 Attach the fall prevention cord (not supplied) to the
wall.
≥ Make sure that the slack of the cord is minimal.
∫
To release the unit from the safety holder
1 Hold the unit firmly with one hand.
2 Insert two fingers and press the two catches of the
safety holder with the other hand.
3 While pressing the two catches, slightly lift up the
unit vertically until the slot released from the hook
of the safety holder.
Hook
Wall mount
bracket
Safety holder
Wall
Slot
Cord (not supplied)
Screw eye (not supplied)
Wall
SC-HC410PC-TQBJ2179_Eng.book 19 ページ ２０１９年２月１５日 金曜日 午前１０時５９分
To Next Page
Loading...
