Name: Panasonic SC-HTB250
Brand: Panasonic
Rating: 4 (1 reviews)

To Next Page

To Previous Page

TQBJ2086

Indicators illumination

The indicators show the condition of this system. The indicator patterns illustrated below are shown

during normal operational conditions. They do not refer to the indications of a problem.

Indicators Description

The indicator blinks for 5 seconds.

• When the setting is on

(“Auto power down”, “Bluetooth

standby”, “Volume limitation”)

(

~13)

• When the audio format is Dolby Digital. (~ 13)

• When the dual audio is main. (~12)

The indicator blinks for 5 seconds.

• When the audio format is DTS

. (~13)

The indicator blinks for 5 seconds.

• When the setting is off

(“Auto power down”, “Bluetooth

standby”, “Volume limitation”)

(

~13)

• When the audio format is PCM. (~13)

• When the dual audio is secondary. (~12)

The indicator blinks quickly.

• When the main unit is ready for pairing. (~11)

The indicator blinks slowly.

• When the main unit is waiting to connect. (~11)

The indicator lights on.

• When the main unit is connected to a Bluetooth

device.

(

~11)

The indicator blinks for 5 seconds.

• When the dual audio is main+secondary. (~12)

The indicator blinks for 10 seconds.

• When the remote control is set to code 2. (~16)

The indicator blinks for 10 seconds.

• When the remote control is set to code 1. (~16)

The indicators blink until the system restarts.

• When the main unit is reset. (~16)

The indicators blink continuously.

• When the sound is muted. (~12)

The indicators blink 10 times.

• When active subwoofer is failed to connect. (~ 16)

MUSIC CINEMA HDMI(ARC) OPTICAL

TQBJ2086_en.fm Page 17 Wednesday, December 27, 2017 2:30 PM

offset printing

Questions and Answers:

Need help?

Do you have a question about the Panasonic SC-HTB250 and is the answer not in the manual?

Panasonic SC-HTB250 Specifications

General

Audio decoders	DTS Digital Surround, Dolby Digital
RMS rated power	120 W
Audio output channels	2.1 channels
Audio Return Channel (ARC)	Yes
Number of woofer drivers	1
Full-range driver diameter	100 mm
Soundbar speaker RMS power	80 W
Number of full-range drivers	4
Full-range driver diameter (imperial)	2 \
Bluetooth version	2.1+EDR
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Digital audio coaxial in	-
Subwoofer connectivity	Wireless
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	15 W
FM radio	No
Product color	Black
Docking connector type	Not supported
Subwoofer driver diameter (imperial)	5.5 \
Harmonized System (HS) code	85182200