Panasonic SC-HTB600 User Manual

5
TQBJ2216
Overview of controls
Do the procedure with the remote control. You can also use the buttons on the main unit if they
are the same.
A Standby/on switch [1]
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
B Adjust the volume level (~18)
C Select the input source
[HTB400]
[HTB600]
D Select the Bluetooth
®
device as the source
(~17)
To start Bluetooth
®
pairing, press and hold
[].
E Display panel
F Remote control sensor
Point the remote control at the remote control
sensor, away from obstacles and within the
operation range.
Distance: Within approximately 7 m
Angle: Approximately 20° up and down, 30° left
and right
G [HTB600]
WIRELESS LINK indicator (~17)
Note:
• Do not place objects in front of this system.
• Do not place objects on top of the main unit.
Do not block the top surface of the main unit for proper
ventilation.
• Remove dust and dirt from this system regularly. (~23)
[HTB600]
Main Unit (Front)
Active subwoofer (Front)
TV BT
TV BT HDMI
htb600.400_TQBJ2216_en.fm Page 5 Thursday, May 14, 2020 2:22 PM

Panasonic SC-HTB600 Specifications

General

Audio decoders	DTS 96/24, DTS Digital Surround, DTS Virtual:X, DTS-ES, DTS-HD HR, DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby Digital, Dolby Surround, Dolby TrueHD
RMS rated power	360 W
Audio output channels	2.1 channels
Audio Return Channel (ARC)	Yes
Product color	Black
TV stand usage	-
Soundbar speaker RMS power	160 W
Subwoofer connectivity	Wireless
Wi-Fi	No
HDMI in	1
Bluetooth version	5.0
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Soundbar power consumption	30 W
Power consumption (standby)	2 W
Subwoofer power consumption	36 W
Cables included	AC
Harmonized System (HS) code	85182200

Weight and Dimensions

Depth	120 mm
Width	962 mm
Height	56 mm
Soundbar weight	3300 g
Subwoofer depth	385 mm
Subwoofer width	191 mm
Subwoofer height	413 mm
Subwoofer weight	8400 g