18
TQBM0483
Bluetooth
®
operations
By using the Bluetooth
®
connection, you can
listen to the sound of the Bluetooth
®
audio device
from this system wirelessly.
≥
Refer to the operating instructions of the Bluetooth
®
device
for further instruction on how to connect a Bluetooth
®
device.
Preparation
≥ Turn on the Bluetooth
®
feature of the device and
place the device near the main unit.
1 Press [ -PAIRING] to select
“BLUETOOTH”.
≥ If “PAIRING” is indicated on the display, go to step 3.
2 Press and hold [ -PAIRING] until
“PAIRING” is indicated on the display.
3 Select “SC-HTB700” from the
Bluetooth
®
device’s Bluetooth
®
menu.
≥ A BD address (Bluetooth
®
Device address: an
alphanumeric character string that is displayed by and
unique to the device) may be displayed before the
name of the Bluetooth
®
device is displayed.
≥ If prompted for the passkey on the Bluetooth
®
device,
enter “0000”.
≥ Once the Bluetooth
®
device is connected, the name of
the connected device will be indicated on the display
for a few seconds.
≥ If you register more than 8 devices, ones that have not
been connected for a long period of time may be deleted
from the list of registered devices. In that case, pair with
the deleted devices again.
1 Press [ -PAIRING] to select
Bluetooth
®
mode.
≥ This may display “LINKING” and automatically
connect this system to the Bluetooth
®
device it was
last connected to.
≥ After “LINKING” is displayed, proceed to step 2 if
“BLUETOOTH READY” is displayed.
2 After confirming that “BLUETOOTH
READY” is indicated on the display,
select “SC-HTB700” from the
Bluetooth
®
device’s Bluetooth
®
menu.
∫ Disconnecting a Bluetooth
®
device
Follow the step below if, for example, a
connection has been made to any device other
than the Bluetooth
®
device you want to connect
to.
Press and hold [ -PAIRING] until the
“BLUETOOTH READY” is indicated on the
display.
≥ When “BLUETOOTH” is selected as the source, this
system will automatically try and connect to the last
connected Bluetooth
®
device. If the connection attempt
fails, try to establish a connection again.
≥ This system can only be connected to one device at a time.
≥ To change the sound quality, refer to “LINK MODE”. (> 20)
≥ Video and audio may be out of sync when you play back
music accompanied by video.
Bluetooth
®
pairing
Connecting a paired
Bluetooth
®
device
SC-HTB700-EGEBGNGW-TQBM0483_eng.book 18 ページ ２０１９年６月６日 木曜日 午前１０時２１分
To Next Page
Loading...
Need help?
General
