21
TQBM0483
∫ VIERA LINK
Turn on the VIERA Link function.
Select “OFF” when your HDAVI Control device
does not work correctly with this system.
≥ ARC will be disabled. Connect an optical digital audio
cable.
≥ Turn off all connected devices and then turn them on again
after changing the setting.
∫ STANDBY MODE
When this function is set to “ON”, then the main
unit automatically turns on in the following cases.
– When a Bluetooth
®
connection is established to the main
unit from a paired Bluetooth
®
device.
≥ The default setting is “ON”.
≥ If this function is set to “ON”, the standby power
consumption will increase. (> 30)
∫ RESET
This restores the settings to the factory presets.
≥ For details, refer to “To return to the factory preset.” (> 24)
∫ F/W VERSION
You can check the firmware version.
≥ The version of the installed firmware is displayed when you
press [OK] while “F/W VERSION” is being displayed.
Press [OK] again to stop the display.
≥ Changed settings will be kept until it is changed again,
unless otherwise indicated.
Occasionally, Panasonic may release updated
firmware for this system that may add or improve
the way a feature operates. These updates are
available free of charge.
Preparation
≥ Download the latest firmware from the following
website and store it to a USB device to update
the firmware.
https://panasonic.jp/support/global/cs/audio/
(This site is in English only.)
1 Turn off the main unit, then connect the
USB device containing the latest
firmware to the main unit.
≥ Depending on the shape of the USB device, the
cables connected to other terminals may obstruct the
connection. In that case, unplug the connection
cables around the USB device first, then reconnect it.
2Touch [Í/I] on the main unit to turn it on.
When the update has finished successfully,
“SUCCESS” is displayed.
3 Disconnect the USB device.
4Touch [Í/I] on the main unit to turn it off,
then touch [Í/I] on the main unit to turn
it on.
≥ If there are no updates, “NO NEED” is displayed.
≥ You cannot output sound from this unit while updating the
firmware.
≥ To view the TV during update, change the settings on the
TV to have the sound output from the TV’s speakers. Refer
to the operating instructions of the TV for details.
≥ If “PLEASE DISCONNECT USB DEVICE” appears on the
display, disconnect the USB device. After that, touch [Í/I]
on the main unit to turn it off, then touch [Í/I] again to turn
it on.
Firmware update
For the latest information, refer to the site
below.
https://panasonic.jp/support/global/cs/audio/
(This site is in English only.)
DO NOT DISCONNECT the AC mains
lead while one of the following messages
is displayed.
“CHECK □□ %”
“UPDATE □□□ %”
(“ □ ” stands for a number.)
≥ During the update process, no other operations
can be performed.
SC-HTB700-EGEBGNGW-TQBM0483_eng.book 21 ページ ２０１９年６月６日 木曜日 午前１０時２１分
To Next Page
Loading...
Need help?
General
