23
TQBM0483
∫ Automatic input switching
When the following operations are performed, the
main unit will automatically change the input to
the corresponding source.
jWhen play starts on an HDMI connected
device.*
3
jWhen the TV input or the TV channel is
changed.
*3 If the speaker output setting on the TV is set to this
system, the TV and the main unit turn on automatically
(Power on link).
∫ Power off link
When the TV is turned off, the main unit also turns
off automatically.
(This function does not work when
“BLUETOOTH” is the source.)
∫ Automatic lip-sync function
(for HDAVI Control 3 or later)
Delay between audio and video is automatically
adjusted by adding time-lag to the audio output,
enabling you to enjoy smooth audio for the
picture.
≥ It may take up to 8 seconds for sound to be output from this
unit after turning the TV (VIERA) on. You can reduce the
amount of time it takes for sound to be output by using an
optical digital audio cable. If you do so, reconnect the
HDMI cable to a non-ARC compatible HDMI terminal on
the TV (VIERA). (> 8)
≥ The delay information is automatically set if the TV is
compatible to VIERA Link “HDAVI Control 3” or later and
the VIERA Link is set to on.
The setting causes a sound delay of approximately 0.04
seconds when connected to a Panasonic TV (VIERA) with
VIERA Link (HDMI) version 2 or earlier or a TV from
another manufacturer.
SC-HTB700-EGEBGNGW-TQBM0483_eng.book 23 ページ ２０１９年６月６日 木曜日 午前１０時２１分
To Next Page
Loading...
Need help?
General
