Panasonic SC-PM11

CD1 CD2 CD3 CD4 CD5
00000
Preparation:
l Do the preparatory steps (- page 19).
l Press [SELECTOR] to select disc as the source and insert the disc(s)
you want to record (- page 11).
0
Press [(CD 1) - (CD 5)] to select the disc to be re-
corded, then [STOP W] to stop play.
q
Press [O RECAI] to start recording.
The CD starts.
To stop recording
Press [STOP I].
The CD stops, and the tape stops after making a 4 second silent
interval.
To record programmed tracks
@ Program the tracks (- page 13).
@ Press [O RECYII] to start recording.
Play starts.
To stop recording, press [STOP n ].
Disc play stops automatically.
1 Recording with CD Manager (- page 14)
I
Record discs after selecting the required CD MANAGER mode
(1 -TRACK, 1 -DISC, 1 -ALL)
l If a track is cut off in the middle at the end of the front side while
recording, the track will be recorded from the beginning on the
reverse side.
l At the end of the reverse side, recording stops and the current track
will be interrupted.
l Recording pauses while discs are changing and resumes when the
disc is ready.
@I Do steps q to m on page 14.
@ Press [O RECAI] to start recording.
Play starts.
To stop recording
Press [STOP I].
Disc play stops automatically.