8
RQTX1168
≥ Use alkaline or manganese batteries.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in an automobile exposed to direct sunlight
for a long period of time with doors and windows closed.
Do not:
≥ mix old and new batteries.
≥ use different types of batteries at the same time.
≥ take apart or short circuit.
≥ attempt to recharge alkaline or manganese batteries.
≥ use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
severely damage the remote control.
Remove the batteries if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.
Aim at the remote control signal sensor (B 5), avoiding obstacles.
Distance: Within approx. 7 m
Angle: Within approx. 20° up and down, approx. 30° to the left and right
The EASY SETUP screen assists you in making necessary
settings.
≥Language
Select the language used on menu screen.
≥TV aspect
Select the aspect to suit your TV.
≥Speakers position
Select “5.1ch layout” mode or “2.1ch layout” mode according to your
speaker layout (B 6, Positioning).
≥Speaker check
Listen to speaker output to confirm speaker connections.
≥Speaker output
§
Make surround sound setting for speaker output.
§ Only when “5.1ch layout” mode is selected in “Speakers position”
above.
[Note]
Settings in the EASY SETUP can also be changed in the player settings
(e.g. language and TV aspect (B 14)).
step 4 Preparing the remote control
Batteries
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
Use
Press in and lift up.
Replace the cover.
Insert so the poles (r and j) match those in the remote control.
step 5 EASY SETUP
Preparation
Turn on your TV and select the appropriate video input mode (e.g.
VIDEO 1, AV 1, etc.) to suit the connections to this unit.
≥ To change your TV’s video input mode, refer to its operating
instructions.
≥ This remote control can perform some basic TV operations (B 5).
1
Press [Í] to turn on the unit.
≥ When the EASY SETUP screen appears automatically, skip steps 2
to 6.
2
Press [DVD] to select “DVD/CD”.
3
Press [SETUP] to show the setup menu.
4
Press [3, 4] to select “OTHERS” and press [OK].
5
Press [3, 4] to select “EASY SETUP” and press [OK].
6
Press [OK] to select “SET”.
7
Press [3, 4] to select “Yes” and press [OK].
8
Follow the messages and make the settings with
[3, 4, 2, 1] and [OK].
(B below, EASY SETUP settings)
9
Press [OK] to finish EASY SETUP.
EASY SETUP settings
SET
MAIN
DISC
VIDEO
AUDIO
DISPLAY
OTHERS
EXIT : SETUP
RETURN
Menu
RQTX1168-G_eng.book Page 8 Friday, April 23, 2010 4:28 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
