Panasonic sc-pt460

22
Using on-screen menus
RQTX0089
Using on-screen menus
∫ Menu 3 (Audio)
∫ Menu 4 (HDMI)
Confirming HDMI information
e.g.
1 Connection status
2 Shows the output signal type.
3 Shows the number of audio channels.
4 (➜ left, VIDEO FORMAT)
5 (➜ left, COLOUR SPACE)
[Note]
When “OFF” is selected in “AUDIO OUT” ( ➜ 26, “HDMI”
menu
), “– – –” will be displayed in “AUDIO STREAM”.
DIALOGUE
ENHANCER
To make the dialogue in movies
easier to hear
[DVD-V] (Dolby Digital, DTS, MPEG,
3-channel or higher, with the dialogue
recorded in the center channel)
OFF, ON
Dolby PL II
OFF, MOVIE, MUSIC
(➜ 31, Using Dolby Pro Logic II)
HDMI STATUS
To show HDMI information.
( ➜ right, Confirming HDMI information)
HD ENHANCER
This works when the HDMI connection
is being used with “VIDEO PRIORITY”
(➜ 26, “HDMI” menu) set to “ON”.
To sharpen the “720p”, “1080i” and
“1080p” picture quality
OFF, 1 (weakest) to 3 (strongest)
VIDEO FORMAT
This works when the HDMI connection
is being used with “VIDEO PRIORITY”
(➜ 26, “HDMI” menu) set to “ON”.
To select suitable picture quality
with your TV
(Video recordings will be converted to,
and output as, high-definition video.)
§
480p/576p/720p/1080p
(progressive)
§
480i/576i/1080i (interlaced)
≥If the picture is distorted, press and
hold [CANCEL] until the picture is
displayed correctly. (The output will
return to “480p/576p”.)
§
The numbers displayed depend on
the disc being played. One of the
above numbers is displayed.
COLOUR
SPACE
This works when the HDMI connection
is being used with “VIDEO PRIORITY”
(➜ 26, “HDMI” menu) set to “ON”.
To select suitable picture colour
with your TV
YC
bCr (4:2:2), YCbCr (4:4:4), RGB
≥If the setting above is not compatible
with your TV, it will not be displayed.
PLII
HDMI
HDMI --- I NFORMATION
CONNECTED STATE
AUDIO STREAM
MAX CHANNEL
VIDEO FORMAT
COLOUR SPACE
CONNECTED
PCM
2ch
720p
YCbCr 4:4:4
1
2
3
4
5
Body3.fm Page 22 Wednesday, January 9, 2008 11:20 AM