12
RQTX1019
Getting StartedPlaying DiscsOther OperationsReference
[Effective only when “5.1ch layout” mode is selected in
“Speakers position” (B 9, Easy setup settings) and
playing 5.1-channel sound.]
Basic play
Preparation
To display the picture, turn on your TV and change its
video input mode (e.g. VIDEO 1, AV 1, HDMI, etc.) to suit
the connections to this unit.
[Note]
≥DISC CONTINUES TO ROTATE WHILE MENUS ARE
DISPLAYED.
To preserve the unit’s motor and your TV screen, press
[∫ STOP]5 when you are finished with the menus.
≥Total title number may not be displayed properly on
iR/iRW.
≥ABOUT DIVX VIDEO:
DivX
®
is a digital video format created by DivX, Inc. This
is an official DivX Certified device that plays DivX video.
1
Press [OK]9 to enter test tone mode.
Test tone will be output to each channel in the
following order.
LEFT, CENTER, RIGHT, SURROUND RIGHT,
SURROUND LEFT
2
Press [OK]9 then [3, 4]9 to adjust the speaker
level for each speaker. (CENTER, SURROUND
RIGHT, SURROUND LEFT)
`
6dB to
i
6 dB (Factory preset: 0 dB)
≥To exit the screen, press [SETUP];.
To adjust speaker level during play
1 Press and hold [—CH SELECT]; to select the
speaker.
While the speaker channel is displayed, press
[—CH SELECT];.
L# C# R# RS# LS# SW
^---------------------------------------------}
≥You can adjust SW (Subwoofer) only if the disc
includes a subwoofer channel.
≥
“S” appears on this unit’s display when you have
selected “S.SRD” (
B 11
, Enjoying surround sound
effects). In this case, you can adjust both surround
speaker levels at the same time using
[3, 4]9
.
S: `6dB to i6dB
2 Press [3]9 (increase) or [4]9 (decrease) to
adjust the speaker level for each speaker.
C, RS, LS, SW: `6dB to i6dB
(L, R: Only the balance is adjustable.) (B below)
Adjusting the balance of the front speakers
1
Press and hold [—CH SELECT]; to select “L” or
“R”.
2
While “L” or “R” is selected, press [2, 1]9.
1
Press [Í/I]1 or [Í]1 to turn on the unit.
2
Press [DVD]@ to select “DVD/CD”.
3
Press [< OPEN/CLOSE]2 to open the disc tray.
4
Load the disc.
≥Load double-sided discs so the
label for the side you want to play
is facing up.
5
Press [1]8 or [1 PLAY]5 to start play.
≥Press [r, s VOL]6/> to adjust the volume.
AUDIO-SPEAKER SETTINGS-TEST TONE
SPEAKER
LEFT
CENTER
RIGHT
SURROUND RIGHT
SURROUND LEFT
TRIM LEVEL
− −
0dB
− −
0dB
0dB
Basic controls
One touch play (remote control only): [1 PLAY]5
(during standby mode)
This unit automatically turns on and starts playing the
disc in the tray.
Stop: [∫ STOP]5
The position is memorised while “RESUME STOP” is on
the screen.
≥Press [1 PLAY]5 to resume.
≥Press [∫ STOP]5 again to clear the position.
Pause: [; PAUSE]5
≥Press [1 PLAY]5 to restart play.
Skip: [:, 9 SKIP]5
Search: [6, 5]5 (during play)
≥Up to 5 steps.
≥Press [1 PLAY]5 to start normal play.
Slow-motion: [6, 5]5 (during pause)
≥[VCD] Slow-motion: Forward direction only.
≥[MPEG4] [DivX] Slow-motion: Does not work.
Frame-by-frame: [2;, ;1]9 (during pause)
[DVD-VR] [DVD-V] [VCD]
≥[DVD-VR] [VCD]
Forward direction only.
On-screen item select: [3, 4, 2, 1, OK]9
[3, 4, 2, 1]9: Select
[OK]9: Confirm
Enter number: Numbered buttons
[DVD-VR] [DVD-V] [VCD] [CD]
e.g. To select 12: [S10]3 B [1] B [2]
[VCD] with playback control
Press [∫ STOP]5 to cancel the PBC function, and then
press the numbered buttons.
[DVD-V] Show a disc top menu: [TOP MENU]8
[DVD-V] Show a disc menu: [MENU]:
Return to previous screen: [RETURN]E
[VCD] (with playback control) Show a disc menu:
[RETURN]E
This unit display: [FL DISPLAY]G
[DVD-VR] [DVD-V] [WMA] [MP3] [MPEG4] [DivX]
Time display ,-. Information display (e.g. [DVD-VR]
Program number)
[JPEG]
SLIDE,-.Contents number
SC-PT70EB-RQTX1019-B_eng.book Page 12 Thursday, August 13, 2009 5:07 PM
To Next Page
Loading...
