Panasonic SC-PT70

9
RQTX1019
Getting Started
Conserving power
This unit consumes a small amount of power, even
when it is in standby mode (approx. 0.48 W). To save
power when the unit is not to be used for a long time,
unplug it from the household mains socket.
You will need to reset some memory items after
plugging in this unit.
[Note]
The included AC mains lead is for use with this unit only.
Do not use it with other equipment. Also, do not use
cords for other equipment with this unit.
Do not:
≥mix old and new batteries.
≥use different types of batteries at the same time.
≥take apart or short circuit.
≥attempt to recharge alkaline or manganese batteries.
≥use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage
which can severely damage the remote control.
Remove the batteries if the remote control is not going to be
used for a long period of time. Store in a cool, dark place.
Aim at the remote control signal sensor (B 4), avoiding
obstacles, at a maximum range of approx. 7 m directly
in front of the unit.
The Easy setup screen assists you in making
necessary settings.
≥Language
Select the language used on menu screen.
≥TV aspect
Select the aspect to suit your TV.
≥Speakers position
Select “5.1ch layout” mode or “2.1ch layout” mode
according to your speaker layout (B 7, Installation).
≥Speaker check
Listen to speaker output to confirm speaker connections.
≥Speaker output
§
Make surround sound setting for speaker output.
§
Only when “5.1ch layout” mode is selected in
“Speakers position” above.
[Note]
≥
If this unit is connected to a “HDAVI Control 3 or later”
compatible TV via HDMI cable, the menu language and
TV aspect information will be retrieved via VIERA Link.
≥If this unit is connected to a “HDAVI Control 2”
compatible TV via HDMI cable, the menu language
information will be retrieved via VIERA Link.
≥Settings in the Easy setup can also be changed in the
player settings [e.g. language, TV aspect (B 17)].
step 3 AC mains lead connection
BE SURE TO READ THE CAUTION FOR THE AC
MAINS LEAD ON PAGE 2 BEFORE CONNECTION.
AC IN
To household mains socket
AC mains lead (included)
This unit (rear)
step 4 Preparing the remote control
Batteries
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to the
manufacturer’s instructions.
R6/LR6, AA
Insert so the poles ( and ) match those in the
remote control.
Press in and lift up.
Replace the cover.
≥Use alkaline or manganese batteries.
≥Do not heat or expose to flame.
≥Do not leave the battery(ies) in an automobile
exposed to direct sunlight for a long period of time
with doors and windows closed.
Use
step 5 EASY SETUP
Preparation
Turn on your TV and select the appropriate video input
mode (e.g. VIDEO 1, AV 1, HDMI, etc.) to suit the
connections to this unit.
≥To change your TV’s video input mode, refer to its
operating instructions.
≥This remote control can perform some basic TV
operations (B 4).
1
Press [Í]1 to turn on the unit.
≥When the Easy setup screen appears
automatically, skip step 2 to 6.
2
Press [DVD]@ to select “DVD/CD”.
3
Press [SETUP]; to show the setup menu.
4
Press [ 3 , 4 ] 9 to select “OTHERS” and press [OK] 9 .
5
Press [ 3 , 4 ] 9 to select “EASY SETUP” and press
[OK]
9 .
6
Press [OK]9 to select “SET”.
SET
MAIN
DISC
VIDEO
AUDIO
DISPLAY
HDMI
OTHERS
EXIT : SETUP
RETURN
Menu
7
Press [3, 4]9 to select “Yes” and press [OK]9.
8
Follow the messages and make the settings with
[
3 , 4 ] 9 and [OK] 9 . ( B below, Easy setup settings)
9
Press [OK]9 to finish Easy setup.
Easy setup settings
QUICK START GUIDEQUICK START GUIDEQUICK START GUIDE
step 2-5
SC-PT70EB-RQTX1019-B_eng.book Page 9 Thursday, August 13, 2009 5:07 PM