6
TQBJ2018
6
Overview of controls
Do the procedures with the remote control. You can also use the buttons on the unit if they are the same.
A Standby/on switch [`], [1]
Press to turn the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a
small amount of power.
B Select the audio source
On the unit:
To start Bluetooth
®
pairing, press and hold [ ].
C Basic playback control
D View the setup menu
E View the content information
F Select or confirm the option
G Open or close the disc tray
H Decrease the brightness of the display panel
The illumination is also turned off.
To cancel, press the button again.
I Adjust the volume level
J Mute the sound
To cancel, press the button again.
“MUTE” is also canceled when you adjust the volume
or when you turn off the system.
K View the play menu
L Select the sound effects
M Select the jukebox
N USB port ( )
O Disc tray
P Display panel
Q Remote control sensor
Distance: Within approximately 7 m (23 ft)
Angle: Approximately 20° up and down,
30° left and right
Preparing the remote control
Use alkaline or manganese battery.
Install the battery so that the poles (+ and –) align with
those in the remote control.
UA3PP_TQBJ2018_en.fm Page 6 Monday, May 15, 2017 9:58 AM
To Next Page
Loading...
