To Next PageTo Next PageWhat to do if Panasonic SC-XH170 Home Theater System remote control buttons are not responding?
If the remote control isn't working, first, check that the battery is correctly installed. If it is, the battery may be depleted, so replace it with a new one. Ensure you are aiming the remote control directly at the remote control signal sensor during operation.
How to reset forgotten ratings password on Panasonic SC-XH170 Home Theater System?
To reset a forgotten ratings password, reset all the settings to Factory Preset. While “DVD/CD” is the source and there is no disc inserted, press and hold [< OPEN/CLOSE]2 on this unit and [S10]2 on the remote control until “RESET” appears on this unit’s display. Turn the unit off and on again. All settings will return to the default values.
Why is there no picture or sound on my Panasonic SC-XH170?
If you're experiencing a lack of picture or sound, verify the video or speaker connections. Also, ensure the power and input settings are correctly configured on both the connected equipment and the Panasonic Home Theater System. Check that the disc has content recorded on it. Note that during HD JPEG playback, there will be no video output from the VIDEO OUT terminal.
What to do if my Panasonic Home Theater System has no power?
If your device has no power, make sure the AC mains lead is securely inserted.
What to do if my Panasonic Home Theater System is making a humming sound during play?
If you hear humming during playback, it could be due to an AC mains lead or fluorescent light being too close to the unit. Try to keep other appliances and cables away from the Panasonic Home Theater System.
Why does my Panasonic SC-XH170 automatically switch to standby mode?
Your Panasonic Home Theater System might be switching to standby mode automatically because the Sleep timer was active and reached its set limit. Also, the unit is designed to automatically enter standby mode after 30 minutes of inactivity.
What to do if no sound is coming from my Panasonic SC-XH170 Home Theater System?
If there is no sound, note that there may be a slight pause in sound when you change the play speed. If the input source is bitstream, set the sound setting to PCM on the external equipment. When using the HDMI output, audio may not output from other terminals. Audio may not be output due to how the files were created. During playback of DTS source, there will be no sound from the speakers. Select a different audio source (e.g. Dolby Digital).
What to do if my Panasonic Home Theater System is not displaying the picture correctly?
If the picture on the TV is not displayed correctly or disappears, it might be because the unit and TV are using different video systems. Use a multi-system or PAL TV. It could also be that the system used on the disc does not match your TV. Change the “TV System” settings to match your TV.
Why is the sound distorted on my Panasonic Home Theater System?
Sound distortion may occur if the format (sampling frequency, etc.) of the digital audio input is not supported by this unit.
What to do if my Panasonic SC-XH170 Home Theater System is not responding when I press any buttons?
If the unit isn't responding to button presses, it may not be operating properly due to lightning, static electricity, or another external factor. Try turning the unit off and then back on. Alternatively, turn it off, disconnect the AC mains lead, and then reconnect it. Condensation may have formed. Wait 1 to 2 hours for it to evaporate.
General| Brand | Panasonic |
|---|---|
| Model | SC-XH170 |
| Category | Home Theater System |
| Language | English |
