72
VQT2L14
Playback
Editing
2
Dividing a scene to
partially delete
This divides the recorded scenes in two and deletes the front half or back half.
/
¬ Change the mode to , and switch play mode selection to [VIDEO/
Built-inMemory] (l 62)
¬ Change the mode to , and switch play mode selection to [VIDEO/HDD]
(l 62)
1 Select the menu. (l 27)
2 Select the scene to be divided,
then press the joystick.
3 When you reach the point where you
want to divide the scene
Select [ ] with the joystick.
≥ Move the joystick left or right to fast
forward/rewind playback.
≥ Using slow-motion playback or frame-by-
frame playback makes it easy to search
for the point where you want to divide the
scene. (l 64)
4 Select the half that you want to
delete and press the joystick.
5 Select [YES], then press the
joystick to play back the part to
be deleted.
≥ When you stop the playback, the
confirmation message appears.
≥ When [NO] is selected, the confirmation
message appears.
Proceed to step 6.
6 Select [YES], then press the
joystick.
To continue dividing and deleting
other scenes
Repeat steps 2 to 6.
To complete editing
Press the MENU button.
≥ It is impossible to divide and delete
scenes with a short recording time. The
length of the remaining scenes must be
3 seconds or longer.
≥ It is impossible to set the dividing point at
the beginning or the end of the scene.
≥ When a scene that was divided and
deleted using the SPLIT&DELETE
function is copied to a disc using the DVD
burner or the supplied software and
played back on another device, a
maximum of about 1 second of the
deleted part may be played back.
≥ The actual division may slightly slip off the
previously designated dividing point.
[EDIT SCENE] # [SPLIT&DELETE]
SDR-H85&S50&T55&T50-VQT2L14_eng.book 72 ページ ２００９年１２月２２日 火曜日 午前１０時３３分
To Next Page
Loading...
