14
VQT0T50
Before inserting/removing an SD card, be sure to turn the power [OFF]. (P18)
If the SD card is inserted or removed with the power turned on, this unit may
malfunction or the data recorded on the SD card may be lost.
1 Open the LCD monitor and then slide
the card slot open lever 1 to open the
card slot cover.
2 Insert/remove the SD card into/from
the card slot 2.
A Label side
≥ When inserting an SD card, face the label side
towards you and press it straight in with one
stroke as far as it goes.
≥ When removing the SD card, open the card
slot cover and press the center of the SD card
and then pull it straight out.
3 Securely close the card slot cover.
Inserting/Removing an SD card
1
2
2
VQT0T50_PP_ENG.book 14 ページ ２００５年８月３１日 水曜日 午後２時２５分
To Next Page
Loading...
