Panasonic SDR-S100 - Wind Noise Reduction Function; This Is for Reducing the Wind Noise; Wide Mode; This Is for Selecting the Screens

40
VQT0T50
¬Rotate the mode dial to select .
Press the menu button, then use the
cursor button to select
[BASIC]>[ WIND CUT]>[ON].
(P26)
To cancel the wind noise reduction function
Press the menu button, then use the cursor button to select
[ BASIC]>[ WIND CUT]>[OFF]. (P26)
This allows you to record images compatible with wide-screen TVs (16:9) and regular TVs (4:3).
∫ Recording images with a 16:9 aspect ratio
¬Rotate the mode dial to select .
Press the menu button, then use the
cursor button to select
[BASIC]>[WIDE]>[ON]. (P26)
∫ Recording images with a 4:3 aspect ratio
¬Rotate the mode dial to select .
Press the menu button, then use the
cursor button to select
[BASIC]>[WIDE]>[OFF].
(P26)
Wind noise reduction function
This is for reducing the wind noise coming into the microphone when recording.
MENU
SETUP ENTER
EXIT
SCENE MODE
WIDE
WIND CUT
CLOCK SET
BASIC
OFF
ON
REC MODE
≥ This function’s default setting is [ON].
≥ Reduces the wind noise depending on the wind strength. (If this function is activated in
strong winds, the stereo effect may be reduced. When the wind weakens, the stereo
effect will be restored.)
Wide mode
This is for selecting the screen’s aspect ratio when recording motion pictures.
MENU
SETUP ENTER
EXIT
SCENE MODE
WIDE
WIND CUT
CLOCK SET
BASIC
OFF
ON
REC MODE
MENU
SETUP ENTER
EXIT
SCENE MODE
WIDE
WIND CUT
CLOCK SET
BASIC
OFF
ON
REC MODE
VQT0T50_PP_ENG.book 40 ページ ２００５年８月３１日 水曜日 午後２時２５分