39
VQT0T50
Use this function when the light is emanating from behind the subject and the subject
appears dark.
¬Rotate the mode dial to select or .
1 Press the button in the center of the
cursor button to display the icon
shown in the illustration.
2 Press the cursor button
right,
then
select the [
ª] backlight
compensation icon.
≥ The [ª] icon flashes orange, then lights
white.
≥ The image on the screen will become brighter.
To return to normal recording
Select the [ª] icon again.
Backlight compensation function
This is for protecting a backlit subject from being darkened.
≥ In the following case, the backlight compensation is canceled automatically.
– The power is turned off or the mode dial is set to a mode other than motion picture
recording mode or still picture recording mode.
VQT0T50_PP_ENG.book 39 ページ ２００５年８月３１日 水曜日 午後２時２５分
To Next Page
Loading...
