32
VQT0T50
∫ About the indication lamp 1
The indication lamp flashes when signals from the remote control
are sensed and during self-timer operation.
When [ REC LAMP] in [ ADVANCE] is set to [ON], the
lamp lights during recording. You can therefore confirm recording
when this unit is attached to a tripod or when using the remote
control.
∫ About the auto mode
≥ Set the [AUTO/MANUAL/FOCUS] switch to [AUTO],
and color balance (white balance) and focusing will
be adjusted automatically.
(The [ ] indication appears on the screen.)
– Automatic white balance:P103
–
Auto focus: P104
Check before recording (continued)
AUTO
MANUAL
FOCUS
AUTO
VQT0T50_PP_ENG.book 32 ページ ２００５年８月３１日 水曜日 午後２時２５分
To Next Page
Loading...
