Panasonic SH-FX65P

8.1.2.1. TX-TYPE A / RX-TYPE 1
ADC
BB
RF
MCU
EEPROM
CH2
IN
DAC
BB
RF
EEPROM
CH2
OUT
Note:
- One way only
- FX65/FX66 signal flow
- FX65/FX66 only
TX Type A
RX Type 1
MCU
· Type A transmitter uses one ADC (Analog to Digital Converter) and transmits audio through Channel 2. Type 1 receiver (Rx)
uses one DAC and output audio through Channel 2. The firmware (that is downloaded to EEPROM IC) multiplexes which
channel to listen to (in this case Channel 2 since type A is transmitting from channel 2 In) by setting the baseband accordingly.
14
SH-FX65P / SH-FX65PC