21 Service Hint
The following kit assembly is for purpose for parts replacement:-
Models Part No. Part Name & Description Remarks
SH-PT750P/PC-K / SH-PT950P/PC-K RFKVEFX65P-K TX / RX KIT ASSEMBLY (K) [M] (RTL)
SH-FX65P/PC-S RFKVEFX65P-S TX / RX KIT ASSEMBLY (S) [M] (RTL)
SH-PT750P/PC-K / SH-PT950P/PC-K RFKVHFX65TPK TX CASE ASSEMBLY (K) [M] (RTL)
SH-FX65P/PC-S RFKVHFX65TPS TX CASE ASSEMBLY (S) [M] (RTL)
[M] indicates parts that are supplied by PAVCSG.
Table 1
21.1. TX / RX KIT ASSEMBLY
TX / RX kit assembly consists of the transmitter card (Tx Module with casing) and the Rx Module P.C.B
Note: Pls carry out pairing for ID setting. Refer to section 9.2 of this document on procedures
21.2. TX CASE ASSEMBLY
TX card assembly consists of the Tx Module P.C.B in assembled condition with top & bottom casing.
Note: Pls carry out pairing for ID setting. Refer to section 9.2 of this document on procedures
59
SH-FX65P / SH-FX65PC
To Next Page