Panasonic SH-FX65P

Step 2 : Remove 3 screws.
Step 3 : Remove DAMP P.C.B as arrow shown.
10.4.5. Replacement of Digital Amp IC
· Follow the (Step 1) - (Step 5) of item 10.4.1.
· Follow the (Step 1) - (Step 3) of item 10.4.4.
Step 1 : Remove heat sink clip as arrow shown.
Step 2 : De-solder to remove IC5200.
Step 3 : Remove IC5200 as arrow shown.
10.4.6. Disassembly of Receiver Module
P.C.B
· Follow the (Step 1) - (Step 5) of item 10.4.1.
Step 1 : Push the sides of both P.C.B holders.
27
SH-FX65P / SH-FX65PC