Panasonic SL-CT582VGC - 15 Supply of Rechargeable Battery as Replacement Parts; 16 Caution in Use of Rechargeable Battery

Pin
No.
Terminal
Name
I/O Function
47 KEY1 I Operation key signal input
48 KEY2 I Operation key signal input
49 EMPTY I Battery remaining detect signal input
50 AM L O FM/AM select signal output
51 VR SCK2 O Clock signal output for IC1500
52 ACDET I Power failure detect signal input
53 START O Power ON signal output
54 RESET I Reset signal input
55 XOUT O Oscillator connected terminal (F=75 kHz)
56 XIN I
Please take note of the following points relating to Carrying
Case to be used for protection of Rechargeable Battery from
shorting.
Replacement Parts:
· Rechargeable Battery (RFKFHHR4AGTB) to be supplied
will be provided with Carrying Case.
· No replacement parts will be supplied for Rechargeable
· Take Rechargeable Battery out of Carrying Case and use it.
· Be sure to carry Rechargeable Battery in this Carrying
Case.
If not, may either heat or ignite by shorting with a metal.
Pin
No.
Terminal
Name
I/O Function
57 GND5 - GND
58 VDB - Connected to GND via capacitor
59 C1 - Connected to C2 via capacitor
60 C2 - Connected to C1 via capacitor
61 V
EE
I Power supply terminal
62 C3 - Not used, open
63 C4 - Not used, open
64 VLCD - LCD drive signal
Battery without Carrying Case.
· Replacement parts will be supplied for Carrying Case
(RXQ0449) without Rechargeable Battery.
· To your customers, delivery Rechargeable Battery together
with Carrying Case to prevent shorting accidents that may
occur when Rechargeable Battery is carried about without
Carrying Case.
15 Supply of Rechargeable Battery as Replacement Parts
16 Caution in use of Rechargeable Battery
29
SL-CT582VGC / SL-CT582VGN / SL-CT582VGS