Panasonic SL-CT780

5
Skip play
The disc plays from the selected track through to the
last track, then play stops automatically.
Preparation: Put unit in stop mode.
1
Select the desired track.
2
Other Play Methods
The letters such as A in the illustrations refer to the descriptions in the “Location of Controls” section (See page 2.).
Program play
Up to 24 tracks can be entered in the program.
Preparation: Put unit in stop mode.
1 Select the desired track.
2 Register in sequence.
(The indication “M” and the programmed se-
quence appear on the display.)
3 Repeat steps 1 and 2 to program all
the desired tracks.
4
∫ To program the same track in the se-
quence more than once
After step 2, press [MEMORY/RECALL] desired number
of times.
∫ If “'” is displayed
No more tracks may be programmed.
∫ To confirm the contents of the program
Press [MEMORY/RECALL] while the disc is playing.
(The numbers of the programmed tracks appear on the
display in sequence.)
∫ To delete the entire program
Press [∫, OPR OFF].
Note!
The repeat and random play modes are canceled after
steps 1 and 2.
F
65
:9
E
1;
F
65
:9
MEMORY/
RECALL
A
E
1;
Anti-Skip System
This system deals with skipping in a variety
of ways:
≥The thinner and lighter construction makes the unit
less susceptible to vibration.
≥An anti-skip mechanism prevents skipping caused
when play speed changes due to swinging of the unit.
≥A recovery system immediately returns the laser pick-
up to its original position if it is knocked off the track by
a strong shock.
≥The anti-skip memory fills in interruptions caused by
bumps and vibrations.
The capacity of the anti-skip memory de-
pends on how you are using the unit.
≥When listening through stereo earphones
– up to 40 seconds.
≥When connected to an audio system with a
stereo connection cable (analogue) through
[OPT OUT/OUT]
– up to 10 seconds.
≥When an optical cable (digital) is connected to
[OPT OUT/OUT]
– anti-skip memory is off.
By automatically changing the function, the unit allows
you to listen to high-quality, uncompressed digital audio
when connected to an audio system.
When bumps continue repeatedly
The message “SORRY” appears on the display and
sound is interrupted.
Note!
≥While the system is on, the disc rotates at a higher
rate than usual in collecting extra audio data. This
could result in a slight increase in disc rotation noise.
≥The 40-second anti-skip memory compresses digital
signals.
SORRY
VOL
ALL
RANDOM
LIVES
S
XBS TRAIN
-
M 1
[OPT OUT/OUT]
Right side
Repeat play/Random play
Press during play or stop mode.
The setting is switched in the sequence indicated below
each time [MODE] is pressed.
1-track repeat (1 `)(----------------]
One track is repeated. |
v|
All-track repeat (`) |
All the tracks on the disc are repeated. |
v |
Random (RANDOM) |
The tracks play once each in random |
order and then play stops. |
v |
Random repeat (` RANDOM) |
The tracks play repeatedly in random |
order. |
v |
Cancel (no indicator is shown)
--------------}
When pressed during program play
The setting is switched in the sequence indicated below
each time [MODE] is pressed.
1-track repeat (1
`
M)(------------]
One track is repeated. |
v|
Memory repeat (
`
M) |
The programmed tracks are repeated. |
v |
Cancel (
M) -------------------------------------------}
Note!
≥You can select the first track to play in random play
and random repeat play by pressing [9] while the
disc is stopped. All the tracks are played.
≥You cannot select random play or random repeat play
during program play.
MODE
B
RQT5645