- 11 -
SR-TMJ181
5. DISASSEMBLY
5.1 Hinge Cover removal (Hinge Cover)
1. Remove the Dew Collector.
2. Remove the Hinge Cover mounting screws.
3. As show in the figure, insert a narrow flat head screwdriver from just below and pry off the Hinge Cover.
5.2 Inner Enclosure and Upper Frame removal
1. As show in the figure, pry up three fastening hooks. Fixing the Upper Frame, turn the Inner Enclosure
in the arrow direction.
2. The Upper Frame will be seperated from the Inner Enclosure and the Upper Frame.
Note : When assembling, refer to the illustration without the position relationship between the Inner
Enclosure and the Upper Frame.
Inner Enclosure
Hinge Cover
Flat Head Screwdriver
Upper Frame
Hinge Cover
mounting screw
remove
To Next Page
Loading...
