Listen to the
FM
radio
Press the FM TUNER
button
to
turn it on.
•
When this button is on, all
other
operations
such as keyboard performance and CD play-
back are
completely disabled.
Use the FM
TUNING and
-
buttons to select
a station
to listen to.
<Display
exampie>
FM
80.2 MHz
T
1
Lights
during
a
stereo broadcast
Lights when a clear signal is received.
Press
the
buttons
only briefly to select a sta-
tion. If the buttons are
pressed too
long,
auto
tuning will be activated.
Use
the CO/FM TUNER
VOLUME buttons to
ad-
just the
volume
{0
to
20).
<Display>
/
CD/FM tuner
volume
•
After a few seconds,
the display returns to the
previous
display.
Auto tune
Press and hold the FM TUNING
»•
or
-
button, and re-
lease it when the
frequency
begins to
change.
•
The
frequency automatic
stops at
the first
station
that
Is received.
•
If you press the button again, automatic tune stops.
•
In some cases when there is
signal interference, the
signal scan may stop even
though
a station
signal is
not
being
received. In this case you can intermit-
tently tap the button to select the next station.
MEMO
•
When reception
Is poor, try
to
Improve it by adjust-
ing
the
length and
direction
of
the radio antenna.
•
The radio signal is
likely
to be
strongest if
the
Instru-
ment is
situated
next
to
a window.
•
You can
store your favorite frequency settings in the
memory. (Refer to page
26.)
17
QQTG0626
To Next Page
Loading...
