Panasonic SX-MB100 - Error Messages and CD Care; Understanding Error Messages

Error
messages
Indication
Contents
PLEASE WAIT!
Appears
when it takes some
time
to complete an
operation.
COMPLETED!
Appears when an
operation has
been completed.
NO
DISC
You have attempted to play a
CO
in the
CD
&
KEYBOARD
mode,
but
no
CD is inserted.
SORRY!
During CD play, the Instmment
was jarred and sound
was
interrupted.
FA!LED,
TRY
AGA!N
Appears when the CD
tempo
was
unable to be
detected within
a
given
time, and the instrument
automatically exits the
CD tempo detect mode.
ERROR!
Appears
briefly when
some other
error is detected.
About
the
CD
nCOMPACT
(o]D§[g
DIGITAL AUDIO
Use a
CD
which
has
this mark.
•
Please
do
not
use a CD
with a heart
or
other
special mark, as doing
so may result in damage.
X
B
To avoid
injuring your CD,
as well
as damag-
ing
your instrument,
please
heed
the following
points.
•
Do not use a pencil
or ball point
pen to write
on
the CD.
•
Do not wipe with record
cleaner, thinner,
benzene
or alcohol.
II
soiled,
use a clean
damp
cloth to wipe it
clean,
and polish
it with a soft, dry
cloth.
•
Do not
affix
paper
or stickers (decals).
(Do not
use a CD
from which
cellophane tape or a
glue-backed
label has been
peeled
off,
as the
residual
glue may
result
in damage.)
•
Do not insert more
than one CD at a time.
•
Be sure
to remove
the CD from the tray
before
moving
or tilting the
instrument.
About the
ANTI-SKIP
SYSTEM
The
ANTI-SKIP
SYSTEM minimizes any interrup-
tion to the
sound
due
to
vibration
by using
pre-
sampled (up to 10
seconds) performance
data.
•
The
ANTI-SKIP
SYSTEM in
this instrument
is
always
active
whenever
the power is on. (The
function
cannot be
disabled.)
• If
the instrument
is
subjected to consecutive
shocks,
"SORRY"
may
appear
on
the
display
and
the
sound interrupted.
Note: The ANTI-SKIP
SYSTEM in this
instrument
uses digital
compression
technology.
32
QQTG0626