Panasonic TC-1400Z - Page 4

Push the Power Switch on the TV set to turn it on.
Push the “PRE.” (PRESET) Button until the on-screen
display appears as shown below.
Programme number (1 ~ 30)
Band ndicator
(Vl : VHP Low Band, Vh : VHP High Band, U : UHP Band)
Push either the Programme Number Up “ A ” or Down “ V ”
Button to select the desired programme number on which
you want to tune the TV Station of your choice.
Quick Tuning - Fast Selection
Push and hold either the Tuning Up “A” / Down “T”
Button together with the “PAST” Button until the picture of
the desired station appears on the screen.
The band display can be changed from Vl - Vh - U or vice
versa in similar manner.
Fine Tuning
Push either the Tuning Up “A” or Down “T” Button until
the picture and sound quality are at their best. When the
tuning button is released, this tuning position is automati¬
cally memorized.
Repeat steps 3 and 4 to tune all the available TV stations
on the remaining programme numbers.
(Ensure that a new programme number is set before tuning
each station).
After all stations are tuned, push the “PRE.” (PRESET)
Button to return the TV set to the normal operation mode.