16
INSTALLATION AND SET---UP
Further details of Audio/ Video c onnections
can be found on page 21.
Connect A e rial co---axial cable direct
to TV RF IN socket.
OR
Connect aerial co---axial cable to RF Input socket of
VCR and a RF co---axial cable from VCR RF Out
socket to TV RF IN socket.
TheVCRcanalsobeconnectedtotheTVusinga
SCART to SCART lead.
Ancillary equipment and leads are not supplied.
USING A VCR
TV only
1
Switch ON your VCR. *
1
Plug the TV into a mains socket and switch ON.
Programmes will appear immediately if your
dealer has programmed the TV for you.
2
VCR
*1 We recommend that you switch ON the VCR’s test signal --- refer to your VCR instruction book.
To Next Page
Loading...
